Milodon 16335 Performance Aluminum Standard Volume Water Pump for Ford 351C

Milodon 16335 Performance Aluminum Standard Volume Water Pump for Ford 351C Reviews

Other Picture

Milodon 16335 Performance Aluminum Standard Volume Water Pump for Ford 351C Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum Standard Volume Water Pump for Ford 351C has a standard rotation, and is made from aluminum, a standard volume model for 351C engines. Fits Mustang 1970-73, Fairlane 1970, Torino 1971-76, Bronco 1978-82, Trucks 1977-82. Uses a 5/8 inch shaft pilot, 1 3/4 inch inlet and has a 5 11/16 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 31, 2011 00:24:06

Milodon 16285 Performance Aluminum High Volume Water Pump for Olds

Milodon 16285 Performance Aluminum High Volume Water Pump for Olds Reviews

Other Picture

Milodon 16285 Performance Aluminum High Volume Water Pump for Olds Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum High Volume Water Pump for Olds has a standard rotation and is made from aluminum, a high volume model for 350, 403, 455 engines. Fits 350 gas engines 1971-80, 350 diesel engines 1979-85, 260 engines 1975.85, 403 engines 1977-80, 455 engines 1971-76. Uses a 5/8 inch shaft pilot, 1 7/8 inch inlet and has a 6 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 29, 2011 20:53:08

Milodon 16360 Performance Aluminum Standard Volume Water Pump for Mopar Big Block

Milodon 16360 Performance Aluminum Standard Volume Water Pump for Mopar Big Block Reviews

Other Picture

Milodon 16360 Performance Aluminum Standard Volume Water Pump for Mopar Big Block Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum Standard Volume Water Pump for Mopar Big Block has a standard rotation and is made from aluminum, standard volume model for 383, 400, 426, 440 engines. Fits all A, B, C, E Body cars and trucks 1959-79. Uses a 5/8 inch shaft pilot, and has a 3 1/16 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 28, 2011 18:59:04

Proform 68230BK Black Electric Water Pump for GM Big Block

Proform 68230BK Black Electric Water Pump for GM Big Block Reviews

Other Picture

Proform 68230BK Black Electric Water Pump for GM Big Block Feature

• GM B/B ELECT.W/PUMP BLK

GM B/B ELECT.W/PUMP BLK

Visit Store Now !!

Detail Products

Detail Reviews

Jul 27, 2011 19:03:05

PRW 1434621 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV

PRW 1434621 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV Reviews

Other Picture

PRW 1434621 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Polished finish housings

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. 8-hole billet hub. It has a polished pump body and polished aluminum pulley.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 26, 2011 14:51:04

PRW 1445401 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Long-Style Aluminum Water Pump for Chevy BB Mark IV 1969-87

PRW 1445401 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Long-Style Aluminum Water Pump for Chevy BB Mark IV 1969-87 Reviews

Other Picture

PRW 1445401 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Long-Style Aluminum Water Pump for Chevy BB Mark IV 1969-87 Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Satin-cast

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. Block-to-hub 7.3125 inch.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 25, 2011 15:28:20

Edelbrock 8810 Victor Series Mechanical Water Pump

Edelbrock 8810 Victor Series Mechanical Water Pump Reviews

Other Picture

Edelbrock 8810 Victor Series Mechanical Water Pump Feature

• Curved vanes produce greater flow with less cavitation
• 5/8 pilot shaft short style water pump
• Provides maximum cooling for the street and the racetrack
• Ideal to prevent overheating in street rods and street machines
• Includes heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, and leak-proof seals

The Edelbrock Victor Series Mechanical Water Pump provides maximum cooling for the street and the racetrack. They are ideal in preventing overheating in street rods and street machines, as well as in tow rigs and motor homes. This water pump has 3/4 inch ball/ball bearing and is 0.625 inch diameter. The dimension from block surface to hub is 5-5/8 and its inlet diameter is 1.80. It has curved vanes that produces greater flow with less cavitation. This aluminum pump has CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers. This water pump will clear composite timing covers on late model GM performance crate engines.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 24, 2011 16:13:09

Moroso 63500 Mechanical Water Pump

Moroso 63500 Mechanical Water Pump Reviews

Other Picture

Moroso 63500 Mechanical Water Pump Feature

• 327 ALUM WATER PUMP SHORT

Aluminum Water Pump SBC/90 Deg V6 Chevy 5/8 in. Shaft 55-68 Short Design Reinforced Housing Incl. Integral Cam Stop Boss

Visit Store Now !!

Detail Products

Detail Reviews

Jul 23, 2011 19:07:04

Proform 66225R Red Powdercoated Electric Water Pump

Proform 66225R Red Powdercoated Electric Water Pump Reviews

Other Picture

Proform 66225R Red Powdercoated Electric Water Pump Feature

• 144732
• 144802
• 144605
• 144659
• 144755

Electric Water Pump: Chevrolet Small Block; red anodized

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 03:14:04

Proform 66225B Electric Water Pump

Proform 66225B Electric Water Pump Reviews

Other Picture

Proform 66225B Electric Water Pump Feature

• 144732
• 144802
• 144605
• 144659
• 144755

Electric Water Pump Blue Incl. 1 in. Pipe To 1.75 in. Billet Aluminum Hose Fitting Precision Die-Cast

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 23:15:08

PRW 1474400 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440, 1958-71 Hemi and BB 68-79

PRW 1474400 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440, 1958-71 Hemi and BB 68-79 Reviews

Other Picture

PRW 1474400 Performance Quotient As-Cast 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440, 1958-71 Hemi and BB 68-79 Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Satin-cast

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. Kit includes housing, cartridge, water outlet. Block-to-hub 6.472 inch.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 01:45:03

EMP / Stewart Components 43103 Chevy Stage 4 Small Block Short Water Pump

EMP / Stewart Components 43103 Chevy Stage 4 Small Block Short Water Pump Reviews

Other Picture

Stewart stage 4 water pump is the cutting edge in performance water pump technology. This pump utilizes the Stewart components DRV-8 impeller, which is fully computer numerical control machined from 6061-T6 billet aluminum. Its special design flows up to 160 gallons per minute, while consuming over 2 horsepower at 4,500 rotations per minute and is the ultimate water pump for your racing application.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 17:21:41

EMP / Stewart Components 16123 Stage 1 Small Block Ford 221-351W Water Pump

EMP / Stewart Components 16123 Stage 1 Small Block Ford 221-351W Water Pump Reviews

Other Picture

EMP / Stewart Components 16123 Stage 1 Small Block Ford 221-351W Water Pump Feature

• 0.625 inch shaft
• 0.75 inch bearing
• Passenger side inlet
• Iron with rear cover

Stewart stage 1 water pump uses brand new, original equipment castings that are machined to exacting standards. Stage 1 pump is compatible with stock lines and brackets, but is internally modified for performance and reliability. It is recommended for stock, OEM or mild performance applications.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 21:00:04

EMP / Stewart Components 23123 Stage 2 Chevy Small Block Long Water Pump

EMP / Stewart Components 23123 Stage 2 Chevy Small Block Long Water Pump Reviews

Other Picture

EMP / Stewart Components 23123 Stage 2 Chevy Small Block Long Water Pump Feature

• 0.625 inch shaft
• 0.75 inch bearing
• Counter clockwise rotation

Stewart stage 2 water pump is assembled using the exclusive 356-T6 heat treated aluminum casting. This pump includes several significant performance modifications, compared to stage 1 pumps, for maximum performance. It is recommended for stock, OEM or mild-moderate racing applications.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 16, 2011 18:20:06

Milodon 16237 Performance Aluminum High Volume Water Pump for Ford 4.6L / 5.4L

Milodon 16237 Performance Aluminum High Volume Water Pump for Ford 4.6L / 5.4L Reviews

Other Picture

Milodon 16237 Performance Aluminum High Volume Water Pump for Ford 4.6L / 5.4L Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum High Volume Water Pump for Ford 4.6L / 5.4L has a reverse rotation, and is aluminum, a high volume model for 4.6L and 5.4L engine. Fits Mustang GT and Cobra 1999-2001. Uses a 1 9/16 inch shaft pilot, and has a 87mm or 3 7/16 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 15, 2011 01:47:06

Allstar Performance ALL31050 6.625" x 3/4" Water Pump Pulley

Allstar Performance ALL31050 6.625" x 3/4" Water Pump Pulley Reviews

Other Picture

Made specifically for racing applications using short or Corvette water pumps. Pulleys work with Sweet style power steering pump and pulley to provide the CORRECT ratio, ensuring that the power steering pump and the water pump operate within the RPM range specified by General Motors. Stock pulley ratios do not provide the correct ratio for use in racing where the engine RPM differs greatly from street applications. In order to provide 30% water pump speed, and reduce weight and inertia, the crankshaft and water pump pulleys are smaller in diameter than standard reduction pulleys. The acceleration capabilities of the engine are greatly enhanced.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 14, 2011 04:04:07

Allstar Performance ALL31064 Water Pump Pulley Shim Kit, (Pack of 3)

Allstar Performance ALL31064 Water Pump Pulley Shim Kit, (Pack of 3) Reviews

Other Picture

Use shim kits to properly align pulleys. Water pump shims have dual bolt hole pattern to fit most GM Ring and Pinion Gear Set and Ford water pumps. Crank pulley spacers are for small block Chevy. Each kit includes 3 shims. Water pump kit includes two 1/16 inch and one 1/8 inch shims. Crank kit includes one each of 1/16 inch, 5/64 inch and 1/8 inch shims.

Visit Store Now !!

Detail Products

• Allstar Performance ALL31066 Crankshaft Pulley Shim Kit, (Pack of 3)

Detail Reviews

Jul 13, 2011 08:44:04