PRW 1434620 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV

PRW 1434620 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV Reviews

Other Picture

PRW 1434620 Performance Quotient High Flow Aluminum Water Pump for GM, LS Gen III and IV Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Satin-cast

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. As-cast pump body with black anodized aluminum pulley. 8-hole billet hub.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 01, 2011 04:19:04

Milodon 16245 Performance Steel High Volume Water Pump for Ford 429, 460

Milodon 16245 Performance Steel High Volume Water Pump for Ford 429, 460 Reviews

Other Picture

Milodon 16245 Performance Steel High Volume Water Pump for Ford 429, 460 Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• NOTE: to work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Steel High Volume Water Pump for Ford 429, 460 has a standard rotation, and is made from aluminum, high volume model for 429 and 460 engines. Fits Mustang 1969-71, Torino 1970-73, Galaxie 1970-74 , Trucks 1973-92. Uses a 3/4 inch shaft pilot, 2 inch inlet and has a 5 1/2 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 21:30:39

Milodon 16301 Performance Aluminum High Volume Water Pump for Small Block Chevy

Milodon 16301 Performance Aluminum High Volume Water Pump for Small Block Chevy Reviews

Other Picture

Milodon 16301 Performance Aluminum High Volume Water Pump for Small Block Chevy Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as jus cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum High Volume Water Pump for Small Block Chevy has a standard rotation and is made from aluminum, a high volume model for 350, 383, 400 engines. Fits Camaro 67-68, Chevelle 64-68, El Camino 59-68, Nova 62-68, Impala 59-68, Trucks 65-72, Corvette 59-70 and 1984-91. Uses a 5/8 inch shaft pilot, 1 1/2 inch inlet and has a 5 5/8 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 17:11:28

Edelbrock 8842 Victor Series Mechanical Water Pump

Edelbrock 8842 Victor Series Mechanical Water Pump Reviews

Other Picture

Edelbrock 8842 Victor Series Mechanical Water Pump Feature

• 5/8 pilot shaft
• Unique o-ring that provides a far superior seal than conventional gaskets
• Extremely durable as well as efficient
• Provides maximum flow, maximum pressure and equal distribution to both sides of the block within 1%
• Includes heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, and leak-proof seals

The Edelbrock Victor Series Water Pump provides maximum cooling for the street and the racetrack. They are ideal in preventing overheating in street rods and street machines, as well as in tow rigs and motor homes. This water pump is 0.625 inch diameter and has a right hand inlet with back plate with 5/8 pilot shaft. The dimension form casting to hub is 5.42 and its inlet diameter is 1.78. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers. They have curved vanes that produce greater flow with less cavitation. The hose fittings are included.

Visit Store Now !!

Detail Products

Detail Reviews

May 27, 2011 20:53:09

EMP / Stewart Components 33103 Stage 3 Chevy Small Block Short Corvette Water Pump

EMP / Stewart Components 33103 Stage 3 Chevy Small Block Short Corvette Water Pump Reviews

Other Picture

Stewart stage 3 water pump is assembled using the exclusive Stewart 356-T6 heat treated aluminum casting. This pump features a 0.5 inch billet steel fan hub that is strongly recommended for high rotation per minute and racing applications.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 22:29:14

Weiand 8210WIN Action Plus Satin Finish Aluminum Mechanical Water Pump

Weiand 8210WIN Action Plus Satin Finish Aluminum Mechanical Water Pump Reviews

Other Picture

Weiand 8210WIN Action Plus Satin Finish Aluminum Mechanical Water Pump Feature

• Six-blade stamped steel anti-cavitation impeller
• Features heavy duty shaft with 5/8 pilot
• Pump flow is high volume and the rotation is clockwise
• 100% leak tested for top performance
• Not for competition use

The Weiand Action-Plus aluminum water pump is made of light weight aluminum and designed for top-notch street performance. This pump features a premium quality bearing/seal and has twice the load capacity of stock pumps. Weiand's exclusive housing counter bore keeps the bearing from "walking" out. The pump features a heavy duty shaft with a 5/8" pilot and a six-blade stamped steel anti-cavitation impeller for ideal performance. Weiand leak tests each pump to provide top quality parts and performance.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 00:25:04

Edelbrock 8882 Victor Series Mechanical Water Pump

Edelbrock 8882 Victor Series Mechanical Water Pump Reviews

Other Picture

Edelbrock 8882 Victor Series Mechanical Water Pump Feature

• Block surface to the hub measures 5-5/8 inch
• Comes in a polished aluminum finish
• Includes 5/8" pilot shaft
• Inlet diameter measures 1.84"
• Rotates counter clockwise

Edelbrock Victor Series Mechanical Water Pumps are designed for maximum flow and equal coolant distribution. They come with heavy-duty 3/4 inch roller bearings, billet steel hubs and leak-proof seals to withstand high torsion loads. These water pumps are constructed from aluminum and come with a polished finish for extreme durability.

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 03:14:04

Edelbrock 8866 Victor Series Mechanical Water Pump

Edelbrock 8866 Victor Series Mechanical Water Pump Reviews

Other Picture

Edelbrock 8866 Victor Series Mechanical Water Pump Feature

• 3/4 inch pilot shaft, aluminum, long style, standard rotation
• Extremely durable as well as efficient
• Provides maximum flow, maximum pressure and equal distribution to both sides of the block within 1%
• Includes heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, and leak-proof seals
• Unique o-ring that provides a far superior seal than conventional gaskets

The Edelbrock Victor Series Water Pump provides maximum cooling for the street and the racetrack. They are ideal in preventing overheating in street rods and street machines, as well as in tow rigs and motor homes. It has 3/4 inch ball/roller bearing. It has a left hand inlet and includes new backing plate, the dimension from block surface to hub is 5-1/2 inch, and its inlet diameter is 1.98 inch. The aluminum pump has CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined, cast iron impellers are larger than other impellers. They have curved vanes that produce greater flow with less cavitation.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 22:28:06

PRW 1445510 Performance Quotient Polished 5/8" Pilot Shaft High Flow Aluminum Water Pump for Pontiac 265-455 1969-79

PRW 1445510 Performance Quotient Polished 5/8" Pilot Shaft High Flow Aluminum Water Pump for Pontiac 265-455 1969-79 Reviews

Other Picture

PRW 1445510 Performance Quotient Polished 5/8" Pilot Shaft High Flow Aluminum Water Pump for Pontiac 265-455 1969-79 Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Polished finish housings

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. Block-to-hub 4.500 inch.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 02:28:04

Weiand 8211P Action +Plus Water Pump

Weiand 8211P Action +Plus Water Pump Reviews

Other Picture

Weiand 8211P Action +Plus Water Pump Feature

• Lightweight aluminum
• CNC Machined
• Heavy duty shaft with 5/8 pilot
• Six-blade stamped steel anti-cavitation impeller
• 100% leak tested

Action Plus Pumps Are Not For Competition Use;

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 03:52:03

EMP / Stewart Components 16183 Stage 1 Small Block Ford 221-351W Water Pump

EMP / Stewart Components 16183 Stage 1 Small Block Ford 221-351W Water Pump Reviews

Other Picture

EMP / Stewart Components 16183 Stage 1 Small Block Ford 221-351W Water Pump Feature

• 0.625 inch shaft
• 0.75 inch bearing
• Driver side inlet
• Counter clockwise rotation

Stewart stage 1 water pump uses brand new, original equipment castings that are machined to exacting standards. Stage 1 pump is compatible with stock lines and brackets, but is internally modified for performance and reliability. It is recommended for stock, OEM or mild performance applications.

Visit Store Now !!

Detail Products

Detail Reviews

May 20, 2011 22:24:13

Edelbrock 8822 Victor Series Mechanical Water Pump

Edelbrock 8822 Victor Series Mechanical Water Pump Reviews

Other Picture

Edelbrock 8822 Victor Series Mechanical Water Pump Feature

• Block surface to the hub measures 6-15/16"
• Comes in a polished aluminum finish
• Includes 3/4" pilot shaft
• Inlet diameter measures 1.80"
• Comes in a standard rotation type

Edelbrock Victor Series Mechanical Water Pumps are designed for maximum flow and equal coolant distribution. They come with heavy-duty 3/4' inch roller bearings, billet steel hubs, and leak-proof seals to withstand high torsion loads. These water pumps are constructed from aluminum and come with a polished finish for extreme durability.

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 22:35:04

EMP / Stewart Components 13403 Stage 1 Chevy Small Block Short Water Pump

EMP / Stewart Components 13403 Stage 1 Chevy Small Block Short Water Pump Reviews

Other Picture

EMP / Stewart Components 13403 Stage 1 Chevy Small Block Short Water Pump Feature

• Counter clockwise rotation
• 0.75 inch shaft
• 0.75 inch bearing

Stewart stage 1 water pump uses brand new, original equipment castings that are machined to exacting standards. Stage 1 pump is compatible with stock lines and brackets, but is internally modified for performance and reliability. It is recommended for stock, OEM or mild performance applications.

Visit Store Now !!

Detail Products

Detail Reviews

May 19, 2011 01:01:04

Proform 68220R Red Electric Water Pump for Ford Small Block

Proform 68220R Red Electric Water Pump for Ford Small Block Reviews

Other Picture

mfr: PROFORM Water Pump: Ford Small Block; Aluminum Electric Water Pump; Fittings Included; red

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 04:46:05

PRW 1444001 Performance Quotient 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440 BB and 426 Hemi 1958-79

PRW 1444001 Performance Quotient 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440 BB and 426 Hemi 1958-79 Reviews

Other Picture

PRW 1444001 Performance Quotient 5/8" Pilot Shaft High Flow Aluminum Water Pump for Mopar 361-440 BB and 426 Hemi 1958-79 Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Satin-cast

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. Block-to-hub 3.075 inch. As-cast cartridge.

Visit Store Now !!

Detail Products

Detail Reviews

May 17, 2011 00:59:03

PRW 1445414 Performance Quotient Polished 5/8" Pilot Shaft High Flow Short-Style Aluminum Water Pump for Chevy BB 1965-68 Cars-LDT

PRW 1445414 Performance Quotient Polished 5/8" Pilot Shaft High Flow Short-Style Aluminum Water Pump for Chevy BB 1965-68 Cars-LDT Reviews

Other Picture

PRW 1445414 Performance Quotient Polished 5/8" Pilot Shaft High Flow Short-Style Aluminum Water Pump for Chevy BB 1965-68 Cars-LDT Feature

• Steel hubs and heavy duty shielded-seal roller ball bearings
• Pressure injected aluminum alloy pump bodies
• Back plate "O" ring sealed for competition plus applications
• Reliable cast iron CNC machined impellers
• Polished finish housings

Performance quotient engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitations and proportionally increased flow rates at 5,000 RPM and above. Equalized water flow distribution and pressure-balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rudders will appreciate the improved cooling at low speeds and the polished aluminum water pump bodies. Block-to-hub 5.750 inch.

Visit Store Now !!

Detail Products

Detail Reviews

May 15, 2011 18:03:04

Milodon 16281 Performance Aluminum High Volume Water Pump for Pontiac

Milodon 16281 Performance Aluminum High Volume Water Pump for Pontiac Reviews

Other Picture

Milodon 16281 Performance Aluminum High Volume Water Pump for Pontiac Feature

• Milodon high performance water pumps are designed for the higher cooling demands of high performance as well as jus cruising or towing and RV applications
• Engineered for increased performance and reliability in all applications. Application specific design is a direct factory replacement with all hose connections and bosses
• New, high quality steel or aluminum castings for durability and looks. Large diameter shafts and heavy duty bearings for reliability
• Close tolerance impellers increase coolant flow up to 30 percent. With balanced distribution and improved efficiency, the pressure within the block is increased to help prevent hot spots and steam pockets while improving coolant flow through the radiator
• To work at its highest capability, a non-restrictive, high flow thermostat is recommended

Milodon Performance Aluminum High Volume Water Pump for Pontiac has a standard rotation and is made from aluminum, a high volume model for 350, 400, 455 engines. Fits 350 engine 1969-77, 400 engine 1969-77 and 455 engine 1970-76. Uses a 5/8 inch shaft pilot and has a 4 1/2 inch hub height.

Visit Store Now !!

Detail Products

Detail Reviews

May 14, 2011 19:49:05